Blue Echo Delay Pedal (Mad Professor Clone)

Condition: New
£62.95
  • Description
  • Related Products
  • Reviews
Blue Echo Delay Pedal
(Mad Professor Clone)

The BLUE ECHO DELAY is a natural sounding digital/analogue delay, with an analogue direct signal path.
This Delay has about the same bandwidth as the classic tape echo units and can be used in front of an 
amplifier or in the amplifier effects loops.

There are no noise reduction circuits, which keeps decay of echo as natural as possible.
The echo signal has a tuned filtering to allow extreme settings without interference.
The delay is specially designed to work well with distorted tone, as this is the most critical application, 
where other delays often fail.

You can use the pedal before or after distortion. As such, it will work exceptionally well on clean sounds 
where requirements are less stringent, especially in terms of echo bandwidth and repeat formation.
The delay tone has been carefully tuned with lot of attention to the first critical reflection and how the repeats decay.


The Blue Echo Delay was designed to work as an ambience delay, like that of a vintage tape echo and the repeat 
formation was specifically designed to allow easy setting and less critical setting of delay time

The controls are as follows:
 
• LEVEL, sets the level of delayed signal mixed
with straight guitar tone, fully CCW there is
only straight (un-effected) guitar signal heard
and fully CW gives the loudest delay.
 
• DELAY, controls the delay time from 25 ms
(fully CCW) to 600 ms (fully CW).
 
• REPEAT, controls the repeats of the delay
signal, fully CCW gives one repeat and at fully
CW you get infinite feedback

Power by 9v battrey or 9v power supply (neither incuded)
Due to its pre-gain stage, the pedal will operate from a very p
-JRC4558D chip as used in the classic tube screamer